Inside the Henden Control App.

Menu

All your functions, set up and activation direction.

Home

Where you can activate all your operations, change your light colour, activate your heating (tell your heater what temperature you want it to turn off), activate your actuator valves, view information on all your operations and view your pool chemical levels.

Filter Times

View and change your filtration times. Run once if you wanted to.
Please note*. Your filter times run simultaneously with your sanitisation setup. This is to prevent over chlorination if you wanted to run your heater for extended periods of time.

Temperature

Set your heating temperature – Your heater will automatically turn off once it hits the ideal temp. Please not*. Your heating naturally has a cool down period. Once you tell your heater to turn off, it may run for an additional couple of minutes – each heater is different.

Chemical Balance

If you have Henden Balance installed, you will have this menu available. This is where you can manually prime your pH and ORP. Please note*. Henden Balance is designed to MAINTAIN your chemicals; it is not designed to start from 0 and get to the ideal levels.

Control

Control is the ideal place you want to operate your pool operations. You can also activate on the home screen but to prevent syphoning through OFF/ON/AUTO – this is where you can skip and directly turn OFF/ON. Much easier for operation.

Timers

Where you can set up additional timers away from filter timers. Lighting, actuator timers, heating timers using heat demand, blowers and water features.

Device

This is where you’ll find your device settings, times, location and where you can share your QR with family members or to us, so we can monitor your Henden Control App. We offer a service subscription perfect for this.
Please note*. Under ‘device information’, it is ideal to view which firmware you have. Make sure you are always up to date with firmware, and this is where you will find new updates.

Appliance Setup

This is where you will plug all your equipment into and match up with exactly how you have your equipment set up. If you’d like a detailed quote or help, we offer a detailed quote here.

Pump Setup

If you have a Henden Multi Speed pump setup with all additional comms cables, this is where you’ll setup your settings. You can use the Henden Control App to change your pump speeds.

Light Setup

This is where you can change your light setup. Please note*. Some light transformers won’t be applicable to change light colour – even if they are multi coloured lights. This is key when starting your build process. You can get in contact with our Stylish Pools and Spas Building division for more information.

Heating

This is where all your heating settings come into play. Please note*. It is highly recommended to apply ‘cool down time’ on all gas heating systems.

Spa Setup

When you have a Pool and Spa combo, along with actuator installation, this is where you can enable Pool and Spa mode. Making your modes change with the touch of a button.

Misc

You will find all your extra settings in the menu. If you need any advice, please don’t hesitate to get in touch. We will make sure these settings are fit for your pool operation.